Top 3 Electric Pick Guns | Mr. Locksmith™ Video

Top 3 Electric Pick Guns | Mr. Locksmith™ Video

For further info and to sign up for my new On-LIne “How to Pick Locks” Course go to

Mr. Locksmith New Westminster.

There is a lot of electric picks to choose from. Also, lots of garbage out there. In my opinion, it boils down to these three, and it really depends upon your budget, and what you’re doing.

DINO: It is Chinese made. It is the Dino and is very good. It’s really nice holding a pick, gun-style. I like this. It’s offshore made, I sort of have some problems with that, but it’s held up pretty good in the classroom, with lots of locksmith students. So this is a good choice. You can check my links online. It’s a good product. It’s okay, I like it. I do use it.

KRONOS: This is the Kronos, made in Germany. This is phenomenal. It’s actually extremely well-made. It’s very, very effective. This is gonna last you a long time in your kit. I have no problems at all with the quality, how it’s made. I love the battery in this. It’s absolutely fantastic. It’s good for an hour after you charge it, and you get two batteries. You’re good for two hours of picking. That’s gonna last you a good week, or a couple weeks depending upon how busy you are. It’s great. It’s very well made, and it holds nicely. I love it.

WENDT: The Rolls-Royce is the Wendt. It’s good for almost any lock in the world. It’s got a lot of adjustments. It’s extremely expensive. For service trucks, with locksmiths, you can’t go wrong with this. For the price, and everything else, this is it. What I would recommend, everybody has this one. This is good, but again I don’t like the quality of most offshore stuff. The Germans make fantastic picks, electric picks.

The Kronos is the go-to for in the truck, every day, in my toolbox. When I’ve got those jobs that are very high-end, that have to go in, of course, I’ve got this, but this is my backup for everything else. If you have to worry about different parts of the world, this is it. They’re great, but they’re not meant for covert. There are some special models that are quiet, but for the locksmiths, it even Locksport. These things put everything to shame. This is my number one chase for locksmiths, or if you are into Locksport, if you can cheat and get away with this.

For locksmiths, we are not cheating. We just want to get in, we’re for profit. They’re all moneymakers. They will make you money. And I think these two will last you a long time, Let’s see how they do against a wide range of locks from all over the world.

I hope you enjoyed watching this video. Subscribe to my channel. Also, visit my website, and you can see what online locksmith training I have for beginners, intermediate, and advanced, as well as my covert methods of entry, and my non-destructive methods of entry. For further info and to sign up for my new On-LIne “How to Pick Locks” Course go to http://mrlocksmithtraining.com/

NOTE: New On-Line How to Picks Lock is now available at Mr. Locksmith™

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

 

 

 

How to Open Puzzle Padlock 001 | Mr. Locksmith

How to Open Puzzle Padlock 001 | Mr. Locksmith

For further info go to Mr. Locksmith New Westminster

This is one of my puzzle locks and it is fun to open. The solid brass puzzle padlock is made of solid brass and weighs 1 kilogram.

To open it is more complex than it appears; it requires a more careful inspection to unlock it. Find the right combination of moves and keys to open it. The lock is handmade and from India.

The puzzle locks were originally made if you were an apprentice locksmith, to prove your skills, you had to make a lock, a chest or a lock or padlock, and three master locksmiths would evaluate your lock. One of the main points was how quickly they could open your lock.

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to Mr. Locksmith

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.

Mr. Locksmith Puzzle Padlock 001

 


 

Best Locksmith Tweezers | Mr. Locksmith New Westminster

Best Locksmith Tweezers | Mr. Locksmith New Westminster

For further info and to purchase the Locksmith Tweezer go to Mr. Locksmith New Westminster.

This is the best locksmith tweezer I have ever used and a “must have” for new and experienced locksmiths. The tweezers are made of stainless steel and the tip of the tweezer has been milled and has a grooved tip for fast and easy loading of cylinder pins. Straight and parallel blades provide ease for rekeying locks and top-pin loading,

Pinning Tweezers are a must have for gripping the small bottom pins, top pins, drivers and lock springs.

The Locksmith tweezers are made of stainless steel that will not bend or flex, these slim tweezers can help pinning lock driver pins from inside the lock. If you need to work with locks internal components this is the perfect tool for you or any locksmith or hobbyist.

Mr. Locksmith Tweezers are:
High Quality Brushed Stainless Steel
Length for Easy Handling
Grooved Tip Design for easy grasping of pins
Ribbed Sides prevent fingers slipping
Notch is Milled to a fine edge for Grasping Thin master pins
Locksmith Tools
Locksmith Tweezers for pinning locks
Locksmith Tweezer for rekeying locks

Mr. Locksmith Tweezers

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.

 

 

 

Teaching My Daughter How To Become A Locksmith – Take Your Kids To Work Day

Does your son or daughter want to become a locksmith? My daughter, Hazel is a highly intelligent girl with many skills so I asked my daughter Hazel to join me and learn skills such as how to pick a lock and how to cut a key for “Take Your Kids to Work Day.”

Picking a lock does require skill, but they are skills you can learn with practice. I do teach the same skills I’ve taught Hazel, and additional locksmithing skills over at my 1-day classes and 4-day classes available at MrLocksmithTraining.com.

What I find amusing is if a teenager is able to pick a lock in seconds with basic instructions, why do many locksmiths have issues with picking basic locks and go straight to drilling it? Locksmith training is available from myself at MrLocksmithTraining.com in Canada, the USA and Asia.

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.

 

LAB Mini .003 Pin Kit | Mr. Locksmith New Westminster

LAB Mini .003 Pin Kit | Mr. Locksmith New Westminster

For more info and to purchase a Lab pin kit go to Mr. Locksmith New Westminster

My favorite Lab pin kit for my toolbox is the LAB Mini .003 Pin Kit. This Lab Pin kit is good for the beginner to advanced Locksmith and is great for Institutional locksmiths.

For more info and to purchase a Lab pin kit go to http://mrlocksmithtraining.com/

My favorite Lab pin kit for my toolbox. I have a large Lab Pin Kit in my Locksmith Service Vehicle and I carry the Lab Mini Kit to the job site for small rekeying jobs.

LAB Mini .003 Pin Kit Universal Rekeying Kit .003 will rekey Kwikset, Schlage, Weiser, Yale, Arrow, Sargent, Weslock, Corbin, Russwin and most popular pin tumbler locks.

Mini Universal Rekeying Kit .003 LMK003:
– .003 Increments
– 81 Sizes
– Masters: .024 – .090
– Drivers: .093 – .235
– Bottoms: .156 – .354
– 115L Cylinder Springs
– Pins per pocket (size dependent)
– Tops: 18 – 80 per pocket
– Bottoms: 18 – 35 per pocket

Mr. Locksmith Mini Lab Kit 003

Description:
– Solid metal construction. The most durable kit you can buy
– Seal-Tight Lid prevents pins from mixing
– Color Passport Pin Chart Pin sizes printed the same color as the Pins
– Dimensions: 8″x6″x11/16″

To purchase the LAB Mini .003 Pin Kit click the following link.

My next most favorite Lab Pin Kit for my Tool Case which I take to every job site is the Lab Mini Universal .003. Click on the following link. LAB MINI UNIVERSAL PIN KIT.

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

About Terry Whin-Yates

Terry Whin-Yates is the president and CEO of Mr. Locksmith. Terry’s Grandad Frank, Dad (Brian) and Uncle Rob taught him how to be a locksmith and operate a locksmith business and most importantly, pick locks. Terry studied Criminology at Simon Fraser University. Today he lives in Vancouver and his children work in the business. Mr. Locksmith has several locksmith franchisees, all of whom are like extensions of the family business.

Terry Whin-Yates participates in locksmith podcasts, he writes blogs and posts locksmith videos on YouTube. Terry is engaged in the locksmith community and is actively working towards the improvement of the Locksmithing industry on a whole.

We at Mr. Locksmith encourage and endorse the proper regulation locksmiths in BC. We abide by all government licensing. All of our locksmiths are experienced, licensed, bonded and insured. Furthermore, all of our locksmiths are committed to providing the highest quality services. We are committed to producing the highest caliber locksmiths in all facets of the trade, including skill, knowledge, and adherence to ethics and regulation – and we are proud to say that our locksmiths will be the friendliest you will ever have to meet.

Recently, Terry Whin-Yates assisted CTV McLaughlin on Your Side team doing an Undercover investigation into locksmith pricing from unlicensed scammer locksmiths but also “bait and switch” tactics used by unscrupulous locksmiths. CTV “showed the website and rate sheet to master locksmith Terry Whin-Yates … to put the locksmith company to the test by installing a simple and easy to pick the residential lock on a condo door in Surrey.” Terry stated “It should have cost, by their rate sheet, it should have been $50. We charge and we tell people on the phone $95 to $150. That’s the cost to open your door.”

LAB Pro Super Wedge Pin Kit .003 | Mr. Locksmith New Westminster

LAB Pro Super Wedge Pin Kit .003 | Mr. Locksmith New Westminster

For more info and to purchase a Lab pin kit go to Mr. Locksmith New Westminster

I use this Lab Pin Kit for my Locksmith Shop and Hands-On Locksmith Training Class so people can refill their pin kits.

Super Wedge Pro Universal Rekeying Kits with drawer
– EPD003
– .003 Increments
– Accommodates 124 Pin sizes, 1 Spring size
– Top/Master Pins sizes: .010 – .200
– Bottom sizes: .156 – .360

Description:
– Large slide out tool drawer
– Special holder in tool drawer to accommodate the LAB Pin Block – – LBP001 (Sold Separately)
– Solid metal construction. The most durable kit you can buy
– Seal-Tight Lid prevents pins from mixing
– Dual-View Pin Tray
– Color Passport Pin Chart®
– Key slots for mounting to workbench
– 72 Pins Per Pocket
– 100 Springs 115L
– Dimensions: 21″ x 7-3/4″ x 4-1/2″ front x 5-3/4″ back

LAB Pro Super Wedge Universal Rekeying Kit .003 will rekey Kwikset, Schlage, Weiser, Yale, Arrow, Sargent, Weslock, Corbin, Russwin and most popular pin tumbler locks.

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

About Terry Whin-Yates

Terry Whin-Yates is the president and CEO of Mr. Locksmith. Terry’s Grandad Frank, Dad (Brian) and Uncle Rob taught him how to be a locksmith and operate a locksmith business and most importantly, pick locks. Terry studied Criminology at Simon Fraser University. Today he lives in Vancouver and his children work in the business. Mr. Locksmith has several locksmith franchisees, all of whom are like extensions of the family business.

Terry Whin-Yates participates in locksmith podcasts, he writes blogs and posts locksmith videos on YouTube. Terry is engaged in the locksmith community and is actively working towards the improvement of the Locksmithing industry on a whole.

We at Mr. Locksmith encourage and endorse the proper regulation locksmiths in BC. We abide by all government licensing. All of our locksmiths are experienced, licensed, bonded and insured. Furthermore, all of our locksmiths are committed to providing the highest quality services. We are committed to producing the highest caliber locksmiths in all facets of the trade, including skill, knowledge, and adherence to ethics and regulation – and we are proud to say that our locksmiths will be the friendliest you will ever have to meet.

Recently, Terry Whin-Yates assisted CTV McLaughlin on Your Side team doing an Undercover investigation into locksmith pricing from unlicensed scammer locksmiths but also “bait and switch” tactics used by unscrupulous locksmiths. CTV “showed the website and rate sheet to master locksmith Terry Whin-Yates … to put the locksmith company to the test by installing a simple and easy to pick the residential lock on a condo door in Surrey.” Terry stated “It should have cost, by their rate sheet, it should have been $50. We charge and we tell people on the phone $95 to $150. That’s the cost to open your door.”

Top 3 Screwdrivers for Locksmiths | Mr. Locksmith Video

Top 3 Screwdrivers for Locksmiths | Mr. Locksmith Video

For further information go to Mr. Locksmith New Westminster

My top 3 Screwdrivers

Let us talk about three of the must have tools you have to have for your locksmith kit. Every one locksmith must have these three tools: Megapro set, Hex set, and the Tamperproof kit.

The Megapro set

The Megapro set – this is the original and inside it it has the flatheads, the Robinsons, the Phillips and some torques. That is absolutely fantastic. It’s a go-to tool. It’s always there, it’s got the tools.

The next one on my kit – the Hex set.

The Hex set

The Hex set – It’s got all the basic or the most popular sizes in it. You have to have this  screwdriver if you’re a locksmith because so many times you’ve misplaced your Allen keys. This is, a must have, fantastic tool. Especially we’re getting a lot of European made locks out there. you still need complete Allen key sets, but you can just grab this and 90% of the time, if not more, this will do the trick.

The other one is the Tamperproof kit.

The Tamperproof set

Tamperproof kit – This is the MegaPro. What it is, it’s for taking out the tamper-proof screws. It’s got all the most popular tamperproofs and torques an dthe flatheads with the holes inside. It is really, really cool.

So these are the three must have tools for everybody. You gotta have these in your locksmith kit. The original MegaPro, it’s got the most popular screws you’re going to run across every single day. The Hex, because you’re running across a lot of these in locks now, more and more all the time, this will probably, used 90% of the time, you’ll still need an Allen key set but it does the trick. And the Tamperproof. This will do for taking out those one way screws that are flatheads and it’s got the special bit for taking out the one way flatheads. It’s got the hex with the hole in it and the torques with the hole in it. Must have tools for the locksmith. For a beginner or a pro, this is a lifesaver. Have a good day. I hope you enjoyed watching this video.

Mr. Locksmith New Westminster

New Westminster Locksmith Main: (604) 259-2522

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive Locksmith: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities

 

Unboxing Lock Tech GM Ignition Removal Tools | Mr. Locksmith Video

Unboxing Lock Tech GM Ignition Removal Tools | Mr. Locksmith Video

For further information go to Mr. Locksmith New Westminster

Unboxing Lock Tech GM Ignition Removal Tools

 

So we have a new “toy”, from LockTech. Instead of an unboxing, we will call it an “unbagging”. It’s a full set from AccuReader LockTech. And this is the ignition removal tools. A onewhole set, is all four of them. Rather than buy one at a time, just buy the whole thing. It would save you some money. And again, this is an unbagging, not unboxing. It has never been opened, and it will be the first time of us “playing” with it. We’ve been using AccuReader LockTech’s tools for years, so it is the first time getting like the whole little set here.

So get that there. It is a total unbagging. They’re easy to tell apart which is kinda cool. So we’ve got a blue side, a yellow side, a green one with a toy. So we got the whole set here of four. Most of their products,  by the way are extremely well made. So it does the trick. And we’ll show this in action, this is just an unbagging today, we’ll show it in action down the road.

These four different tools, they call it the V1, V2, V3, V4. And this’ll take out the ignitions on a whole lot of cars like the Chevrolet Cruzes, Chevrolet Colorado, Silverado, the Alero. It is an interesting tool for me. It’s removing the ignition cylinders from GM vehicles without drilling or damaging which is very cool. We’ve had their other products even before. Some of these are earlier ones, but they’re as fantastic. Instructions comes with the bag.

All four (4) of GM Ignition Removal Tools Set

 

We’ll post some videos of us playing with this. So I hope that helps a little bit. We will play with some ignitions later, but right now this is just an unbagging of a brand new “toy” from AccuReader LockTech for us. I hope you enjoyed watching this video. Subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced, as well as my covert methods of entry and my nondestructive methods of entry.

Mr. Locksmith New Westminster

New Westminster Locksmith Main: (604) 259-2522

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive Locksmith: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities

 

 

2019 Las Vegas Locksmith Training

All Hands-On Locksmith Training NOW FREE for new students
Have you ever wanted to know how to pick locks from a master locksmith? Looking for a career change or to advance your skills as a locksmith? We’ll teach you everything you need to know to be a successful locksmith.All of our hands-on locksmith training classes are included with an 18-month membership to our online courses.You can gain access to all you need to know for $1,500 USD.This includes ONE free hands-on locksmith training course a year.

Book your spot today!

Las Vegas Hands-On Locksmith Training

Want to join us at Club De Soleil Las Vegas for our 4-day hands-on locksmith training course? With every signup in the next 5 days, we will include a free set of premium grade lockpicks that we have manufactured.

Please contact Jonathan at [email protected] for more details.

Buy access to our online courses to obtain FREE access to our Las Vegas
hands-on classes

NOVEMBER 12-15 2018 Las Vegas Training Class

 2019 Las Vegas Training Dates
January 28-31, 2019 (10am – 3pm)
April 7-10, 2019 (10am – 3pm)September 16-19, 2019 (10am – 3pm)December 9-12, 2019 (10am – 3pm)

View our Las Vegas Training video 

As you probably know, we have released several training classes in Las Vegas, NV for November 2018 and many dates in 2019. Per high demand and popular request, these spots will go extremely quickly.

View the Las Vegas class schedule here

The online locksmith training course fee is deductible towards your licensing fee if you wish to become a part of Mr. Locksmith or Mr. ProLock.

We also have many franchise/licensing opportunities available in the USA and in Canada.

If you wish to become a franchisee/licensee, please visit this page and fill out the form here.

Franchise/licensing opportunities are available in almost every state/province. Contact Terry at 1-888-503-5003 for more information about business opportunities or email [email protected].

Terry Whin-Yates is a 3rd Generation Locksmith with over 30+ years of locksmithing experience and a BA (Hons) in Criminology. I will teach you how to rekey and pick locks like a Professional Locksmith. This is a Hands-On Locksmith Class covering basic to advanced Lock Picking Methods and Techniques. Learning how to pick open locks starts with learning the basic to advanced methods of lock picking. The locksmith student will learn the various methods of picking open a lock. I have been teaching locksmith, military and police for over 30 years how to pick open deadbolts, key-in-knob, padlocks, filing cabinets and “pick resistant” and “pick proof” locks. The lock picking class will cover the basic methods are as “Rake,” “Feel” and “Rake and Feel” lock picking methods to advanced lock picking techniques to open locks with mushroom, spool, and spiral pins. We will cover and discuss:

  • Rekey Deadbolt
  • Rekey Key in Knobs
  • Shiming a lock
  • Picking a lock
  • Opening a lock with no keys
  • Single pin picking, Feel Method, French Method
  • Raking, Jiggling, Bumping, Scrubbing
  • Can you lock even be picked?
  • High-Security Locks
  • Tubular, Ace, etc.
  • The lock has malfunctioned.
  • Reading
  • Buying Picks
  • Making Picks
  • Electronic Picks
  • Pick Guns
  • Methods of Entry
  • Legal Issues
  • Tactics
  • Tools
  • Preparation for Entry
  • Setup your own Lock Practice Boards
  • Automotive Lock Picking
  • Other Lock Bypass Methods
  • DAME (Defense Against Methods of Entry)
  • And lots more!

This class free for online locksmith training students from October 14, 2018 (NEW STUDENTS ONLY).

All Lock Picking Students will get access to my five (5) online video on Picking Locks, Using Plug Spinners, etc. and my new book. FREE for all students! As an added bonus you will get a copy of my new book “Penetration Expert: ”How to be a Professional Lock Picker” for FREE and access to Five (5) or my Private On-line Lock Picking Videos. Important Note: All students must pass a Criminal Records Check / Security Clearance from your local Police Force.

All past students will also receive a special bonus! I’ll also throw in a Lab Smart Wedge Universal Pin Kit (.003) a $200 value!

In addition, if you want to purchase lock picks and join the “Penetration Expert: Locksmiths Always Get In” Lock Picking Club you must pass a Criminal Records Check / Security Clearance.

Please click here for details and to purchase.
NOVEMBER 12-15 2018 Las Vegas Training Class

 2019 Las Vegas Training Dates

January 28-31, 2019 (10am – 3pm)

April 7-10, 2019 (10am – 3pm)

September 16-19, 2019 (10am – 3pm)

December 9-12, 2019 (10am – 3pm)

 

Mr. Locksmith Hands-On Locksmith Training in Las Vegas!

Mr. Locksmith Hands-On Locksmith Training in Las Vegas!

For further info go to Mr. Locksmith Training.

Real hands-on locksmithing class designed to teach engineering or maintenance employees for small or large facilities (School, Hospital, Corrections, Policing, etc.) and is a good start for beginners to help you become a locksmith, In-House Institutional Locksmith or start your own locksmith business.

Upcoming Classes in LAS VEGAS, NEVADA

Mr Locksmith Training Las Vegas

 

 

In this training you will:

  • Cut and duplicate keys on code key machines and key duplicator machines.
  • Rekey locks
  • Shim
  • Trouble shoot
  • Pick locks
  • Take apart (and put back together) locks (deadbolts and key in knobs).
  • Lock-outs, broken keys and picking locks.
  • Design a mini Master key system and master key their locks.
  • Rekey Deadbolt
  • Rekey Key in Knobs
  • Shiming a lock
  • Locksmith Training
  • Picking a lock
  • Opening a lock with no keys
  • Single pin picking, Feel Method, French Method
  • Raking, Jiggling, Bumping, Scrubbing
  • Can you lock even be picked?
  • High Security Locks
  • Tubular, Ace, etc.
  • Lock has malfunctioned.
  • Reading
  • Buying Picks
  • Making Picks
  • Electronic Picks
  • Pick Guns
  • Methods of Entry
  • Legal Issues
  • Tactics
  • Tools
  • Preparation for Entry
  • Setup your own Lock Practice Boards
  • Automotive Lock Picking
  • Other Lock Bypass Methods
  • DAME (Defense Against Methods of Entry)
  • And lots more!

The Mr. Locksmith Hands-On Locksmithing Course includes all supplies, lock picks, tools and material needed to take the course with.

This class is only $1,500.00.

Terry Whin-Yates is a 3rd Generation Locksmith with over 30+ years of locksmithing experience and a BA (Hons) in Criminology. I will teach you how to rekey and pick locks like a Professional Locksmith. This is a Hands-On Locksmith Class covering basic to advanced Lock Picking Methods and Techniques. Learning how to pick open locks starts with learning the basic to advanced methods of lock picking. The locksmith student will learn the various methods of picking open a lock. I have been teaching locksmith, military and police for over 30 years how to pick open deadbolts, key-in-knob, padlocks, filing cabinets and “pick resistant” and “pick proof” locks. The lock picking class will cover the basic methods are as “Rake,” “Feel” and “Rake and Feel” lock picking methods to advanced lock picking techniques to open locks with mushroom, spool and spiral pins.

All Lock Picking Students will get access to my five (5) online video on Picking Locks, Using Plug Spinners, etc. and my new book. FREE for all students! As an added bonus you will get a copy of my new book “Penetration Expert:”How to be a Professional Lock Picker” for FREE and access to Five (5) or my Private On-line Lock Picking Videos. Important Note: All students must pass a Criminal Records Check / Security Clearance from your local Police Force.

All past students will also receive a special bonus! I’ll also throw in a Lab Smart Wedge Universal Pin Kit (.003) a $200 value!

In addition, if you want to purchase lock picks and join the “Penetration Expert: Locksmiths Always Get In” Lock Picking Club you must pass a Criminal Records Check / Security Clearance.

Upcoming Classes in LAS VEGAS, NEVADA

See you in Las Vegas!

“If I’d only known, I would have been a locksmith.” Albert Einstein

Visit my website for On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to http://mrlocksmithtraining.com/

Terry Whin-Yates BA (Hons) Criminology, 3rd Generation Locksmith, 35+ Years Locksmith email: [email protected]