How to Open Puzzle Padlock 001 | Mr. Locksmith

How to Open Puzzle Padlock 001 | Mr. Locksmith

For further info go to Mr. Locksmith New Westminster

This is one of my puzzle locks and it is fun to open. The solid brass puzzle padlock is made of solid brass and weighs 1 kilogram.

To open it is more complex than it appears; it requires a more careful inspection to unlock it. Find the right combination of moves and keys to open it. The lock is handmade and from India.

The puzzle locks were originally made if you were an apprentice locksmith, to prove your skills, you had to make a lock, a chest or a lock or padlock, and three master locksmiths would evaluate your lock. One of the main points was how quickly they could open your lock.

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to Mr. Locksmith

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.

Mr. Locksmith Puzzle Padlock 001

 


 

Castration Rings for Locksmiths! Bump Keys! Mr. Locksmith Video

Castration Rings for Locksmiths! Bump Keys! Mr. Locksmith Video

For further info and to purchase Bump Keys go to Mr. Locksmith New Westminster

Bump Keys: My Grandfather was a locksmith and he called it “Rapping a Cylinder” today we call it “Bumping a Lock” with “Bump Keys.”

When bumping a lock, the key is initially inserted into the keyway the “Castration Rings” helps to keep the Bump Key one notch (pin) short of full insertion.

Bump Keys Castration Rings

Bumping the key inward forces it deeper into the keyway. The bump key transmits a slight impact force to all of the key pins in the lock. The key pins transmit this force to the driver pins; the key pins stay in place.

The pin movements are highly elastic, the driver pins “jump” from the key pins for a nanosecond, moving higher than the cylinder (shear line of the tumbler), then are pushed normally back by the spring to sit against the key pins once again. Even though this separation only lasts only a nanosecond with a light rotational force or tension is continuously applied to the key during the slight impact, the cylinder will turn during the short separation time at the shear of the pins, and the lock can be opened while the driver pins are elevated above the shear line.

Lock bumping takes only an instant to open the lock. The lock is not visibly damaged, although the force of the bump can leave an indentation on the front of the cylinder.

Mr. Locksmith Bump Keys

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.

 

 

 

LAB Mini .003 Pin Kit | Mr. Locksmith New Westminster

LAB Mini .003 Pin Kit | Mr. Locksmith New Westminster

For more info and to purchase a Lab pin kit go to Mr. Locksmith New Westminster

My favorite Lab pin kit for my toolbox is the LAB Mini .003 Pin Kit. This Lab Pin kit is good for the beginner to advanced Locksmith and is great for Institutional locksmiths.

For more info and to purchase a Lab pin kit go to http://mrlocksmithtraining.com/

My favorite Lab pin kit for my toolbox. I have a large Lab Pin Kit in my Locksmith Service Vehicle and I carry the Lab Mini Kit to the job site for small rekeying jobs.

LAB Mini .003 Pin Kit Universal Rekeying Kit .003 will rekey Kwikset, Schlage, Weiser, Yale, Arrow, Sargent, Weslock, Corbin, Russwin and most popular pin tumbler locks.

Mini Universal Rekeying Kit .003 LMK003:
– .003 Increments
– 81 Sizes
– Masters: .024 – .090
– Drivers: .093 – .235
– Bottoms: .156 – .354
– 115L Cylinder Springs
– Pins per pocket (size dependent)
– Tops: 18 – 80 per pocket
– Bottoms: 18 – 35 per pocket

Mr. Locksmith Mini Lab Kit 003

Description:
– Solid metal construction. The most durable kit you can buy
– Seal-Tight Lid prevents pins from mixing
– Color Passport Pin Chart Pin sizes printed the same color as the Pins
– Dimensions: 8″x6″x11/16″

To purchase the LAB Mini .003 Pin Kit click the following link.

My next most favorite Lab Pin Kit for my Tool Case which I take to every job site is the Lab Mini Universal .003. Click on the following link. LAB MINI UNIVERSAL PIN KIT.

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

About Terry Whin-Yates

Terry Whin-Yates is the president and CEO of Mr. Locksmith. Terry’s Grandad Frank, Dad (Brian) and Uncle Rob taught him how to be a locksmith and operate a locksmith business and most importantly, pick locks. Terry studied Criminology at Simon Fraser University. Today he lives in Vancouver and his children work in the business. Mr. Locksmith has several locksmith franchisees, all of whom are like extensions of the family business.

Terry Whin-Yates participates in locksmith podcasts, he writes blogs and posts locksmith videos on YouTube. Terry is engaged in the locksmith community and is actively working towards the improvement of the Locksmithing industry on a whole.

We at Mr. Locksmith encourage and endorse the proper regulation locksmiths in BC. We abide by all government licensing. All of our locksmiths are experienced, licensed, bonded and insured. Furthermore, all of our locksmiths are committed to providing the highest quality services. We are committed to producing the highest caliber locksmiths in all facets of the trade, including skill, knowledge, and adherence to ethics and regulation – and we are proud to say that our locksmiths will be the friendliest you will ever have to meet.

Recently, Terry Whin-Yates assisted CTV McLaughlin on Your Side team doing an Undercover investigation into locksmith pricing from unlicensed scammer locksmiths but also “bait and switch” tactics used by unscrupulous locksmiths. CTV “showed the website and rate sheet to master locksmith Terry Whin-Yates … to put the locksmith company to the test by installing a simple and easy to pick the residential lock on a condo door in Surrey.” Terry stated “It should have cost, by their rate sheet, it should have been $50. We charge and we tell people on the phone $95 to $150. That’s the cost to open your door.”

LAB Pro Super Wedge Pin Kit .003 | Mr. Locksmith New Westminster

LAB Pro Super Wedge Pin Kit .003 | Mr. Locksmith New Westminster

For more info and to purchase a Lab pin kit go to Mr. Locksmith New Westminster

I use this Lab Pin Kit for my Locksmith Shop and Hands-On Locksmith Training Class so people can refill their pin kits.

Super Wedge Pro Universal Rekeying Kits with drawer
– EPD003
– .003 Increments
– Accommodates 124 Pin sizes, 1 Spring size
– Top/Master Pins sizes: .010 – .200
– Bottom sizes: .156 – .360

Description:
– Large slide out tool drawer
– Special holder in tool drawer to accommodate the LAB Pin Block – – LBP001 (Sold Separately)
– Solid metal construction. The most durable kit you can buy
– Seal-Tight Lid prevents pins from mixing
– Dual-View Pin Tray
– Color Passport Pin Chart®
– Key slots for mounting to workbench
– 72 Pins Per Pocket
– 100 Springs 115L
– Dimensions: 21″ x 7-3/4″ x 4-1/2″ front x 5-3/4″ back

LAB Pro Super Wedge Universal Rekeying Kit .003 will rekey Kwikset, Schlage, Weiser, Yale, Arrow, Sargent, Weslock, Corbin, Russwin and most popular pin tumbler locks.

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

About Terry Whin-Yates

Terry Whin-Yates is the president and CEO of Mr. Locksmith. Terry’s Grandad Frank, Dad (Brian) and Uncle Rob taught him how to be a locksmith and operate a locksmith business and most importantly, pick locks. Terry studied Criminology at Simon Fraser University. Today he lives in Vancouver and his children work in the business. Mr. Locksmith has several locksmith franchisees, all of whom are like extensions of the family business.

Terry Whin-Yates participates in locksmith podcasts, he writes blogs and posts locksmith videos on YouTube. Terry is engaged in the locksmith community and is actively working towards the improvement of the Locksmithing industry on a whole.

We at Mr. Locksmith encourage and endorse the proper regulation locksmiths in BC. We abide by all government licensing. All of our locksmiths are experienced, licensed, bonded and insured. Furthermore, all of our locksmiths are committed to providing the highest quality services. We are committed to producing the highest caliber locksmiths in all facets of the trade, including skill, knowledge, and adherence to ethics and regulation – and we are proud to say that our locksmiths will be the friendliest you will ever have to meet.

Recently, Terry Whin-Yates assisted CTV McLaughlin on Your Side team doing an Undercover investigation into locksmith pricing from unlicensed scammer locksmiths but also “bait and switch” tactics used by unscrupulous locksmiths. CTV “showed the website and rate sheet to master locksmith Terry Whin-Yates … to put the locksmith company to the test by installing a simple and easy to pick the residential lock on a condo door in Surrey.” Terry stated “It should have cost, by their rate sheet, it should have been $50. We charge and we tell people on the phone $95 to $150. That’s the cost to open your door.”

Forbes: “This Popular Fire Safe Can Be Opened In About One Second” by Terry Whin-Yates

Forbes: “This Popular Fire Safe Can Be Opened In About One Second” by Terry Whin-Yates.

Sentry Safe the leading and most respected fire safe manufacturer in North America has designed one of its most popular containers with a fatal security flaw that can allow many different versions to be opened in one second.

In Vancouver, Canada Marc Weber Tobias met with Terry Whin-Yates, one of Western Canada’s most famous and experienced locksmiths. He is known as Mr. Locksmith through his multiple locations in . He is flamboyant, clever, and comes from a long line of locksmiths in his family. The day before we arrived, he had gone to Costco and purchased a new fire safe (Model # SFW123FTC ) produced by SentrySafe. These safes are manufactured in Rochester, N.Y. SentrySafe is one the most recognized brands for protecting contents from fire and are sold at major office supply and hardware stores. Terry opened the safe in less than a minute.

 

To read the complete Forbes articule go to “This Popular Fire Safe Can Be Opened In About One Second”

Marc Tobias & Terry Whin-Yates opening a Sentry Safe in seconds.

 

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training website.

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/