How To Install Lori Single Cylinder Deadbolt | Mr. Locksmith New Westminster

How To Install Lori Single Cylinder Deadbolt | Mr. Locksmith New Westminster: Installing a Lori deadbolt. The Lori Deadbolt can be  a little bit confusing, because most deadbolts have the screws on the inside, so it’s pretty easy to figure out how to remove it, its double cylinders are a little different, so most of our Kwikset, Weiser, and Schlage deadbolts is pretty simple. You have a couple of screws, you take it out the traditional way. The Lori Deadbolts have a set screw hidden along the side of the bolt. You will need a 5/16-inch long-shaft Allen wrench to install or remove the set screws.

How To Install a Lori Single Cylinder Deadbolt

Tools to Install Lori Deadbolt

  • Phillips screwdriver
  • 5/16-inch long-shaft Allen wrench
  1. Open the Door
  2. Detach the slide bolt faceplate from the door edge by removing the two flathead screws using a Phillips screwdriver.
  3. Remove the thumb latch assembly from the interior side of the door, if applicable, by removing the two screw bolts on either side of the latch handle, then pulling the assembly horizontally from the door.
  4. Slip the long shaft of a 5/16-inch Allen wrench into the space on either side of the slide bolt to engage in the cylinder set screws and turn the set screw counterclockwise two to three full turns to loosen. Repeat for the set screw on the other side of the slide bolt.
  5. Remove the deadbolt cylinders by turning the cylinders counterclockwise until the cylinder is free of the mortise housing. You can insert the deadbolt’s key into the cylinder for leverage in turning the cylinder. Repeat for the opposite side cylinder in double-keyed models.
  6. Pull the slide bolt assembly from the door edge, then remove the cylinder housing from the door hole.

Lori Single Cylinder Deadbolt

A couple of screws. You can see the screws, you can see how to take it apart. And everything apart. So that’s your traditional single cylinder deadbolt. Now I’ll show you the Lori. They’re made by a ilco, UniCan, kaba, whatever you want to call them this week. It’s not my favorite deadbolt. In the year, you know, 35 years ago, it was a good deadbolt and I’ll show you why, because we could make almost any cylinder fit this. So, and that’s why they’re confusing when you see this on the door. Sometimes they’ll say Lori, other times they’ll say, could be Schlage, could be kaba, could be medical. It could be almost any type of lock. And you’ll see why it’s confusing for Locksmiths and also beginner locksmiths, or just the home, do it yourself or try to take this Lori lock off the door. So this is the ilko Lori, pretty simple. It’s instructions. Now, you’ll see it’s already slightly different than our normal deadbolts. And what the important pieces on this is, it’s the Allen key. You needed a long reach Allen wrench or Allen key. What do you want to call it? The Allen wrench or Allen key is five 64 of an inch. So this is what you need. And this is what’s a real pain in the butt. And it has to be a longer one, the normal. So sometimes your little kits don’t have the reach for it. So that’s the most important thing to the installation of this lock. And we’ll just show you what we got here. Now, this is a single cylinder and it’s pretty basic stuff. What you have here is the housing and it’s pretty easy. It says right on there top, is there an inside and outside? Here’s the confusing part. It has the little set screws and you can’t really see it when you’re trying to take it off. But when we’re putting it in, it’s a little bit different. So to install it, we have the cylinder housing, make sure your set screws are flush. That makes it easier to do the install. Top there, just place it in there, take our dead bolt, basically going to feed it in there. This is the single cylinder deadbolt. So this is what comes in the kit. Now this is what gets a little confusing. These machine screws are for holding the thumb turn on, these ones in the bag here, are for holding the housing to the bolts. So we’ll take these out right now. So there we have, now the bolt is into the housing. So the next step is, we have to change, this is a mortis cam and they have to use the Adams right cam. Take it off, put it in, and make sure, you know, you get the right side down. This will set flush, and that’s another common mistake. People put these in. So again, just tight don’t over crank them. And they have to be flush. So we’ve got the Adam’s right cam on the boarder cylinder. Everything’s good, we got the right key. Okay, everything’s perfect. So the spacer goes on first, then our little springy cover. And what we have to do now, take the outside housing, and what we’re going to do, is we’re going to install it. It’s going to screw in similar to an Adam’s rights storefront. But we’re going to screw the mortar cylinder in here. And again, don’t cross thread it. It’s pretty easy to cross thread. And I take the key out a little bit and gently get it snug. We have the mortar cylinder in the outside. Now I’m going to install the thumb turn on the inside. Other screws. Again, don’t force anything. You’ll cross thread the heck out of everything. So again, just do it snug, double check it, and check this. Now what we have to do to make sure, make sure that’s vertical. Now this is the confusing part. You can take your Allen wrench 564s. It has to be long. Now this is the difficult part for most people. You have to get it right in there, and just sort of wiggle it a little bit, and then you get in the set screw. Right to tighten, and again, snug not crazy, so we know we’re in, pull it out. Try that. Yeah, we obviously didn’t, I think we’re, I got to go in a little bit tighter. Cause see how it’s binding a little bit there, right there. We’re either binding on the, I think we’re binding on the set screws. You’d have to back it off or put it in. So let’s just snug. Now it’s a lot better. So just check by putting your, lock it, take the key out, unlock it, take the key out, one more check on the inside. Now we don’t have to do the set screw there because it’s a single cylinder, and these are held into the housing, these two screws. So we don’t have to set the screw there. The cover plate. Make sure it works. Don’t over-tighten these, if you over-tighten it, you’re going to find the bolt won’t open and close properly. There we go. Pretty simple. The advantage of this lock in the old days, again, I am not a fan of it right now, we run across a lot of them, is I can put any mortar cylinder with the Adam’s right cam in here. So I can put in anything. I can put it in a high security, any mortar cylinder lock, or any brand lock, any brand name will screw into that, and you can key it up to anything. So it’s a very versatile. In the old days it was versatile because we didn’t have too much choice. And now we have so many choices right now. As you know my favorite is the, take the Schlage, the B 660s or the 560s, or even the the end series, the new ones, the 60 ends. I can put the kick cylinder, we call them kicks owners. So it’s a cylinder we can put in. But we’re talking about this lock today. So this is the Lori Kaba. In its day it was versatile, but we run across a lot of these and some customers still have them, and some commercial buildings have boxes of these things. So we’re still installing them. They’re okay, I’m not a fan of them. I find them, if they’re exposed to weather, that little set screw rust up and the inside rust up. Again, not my favorite lock. It’s not that cheap either, but we run across them. So this is the Ilco, Lori, Kaba style deadbolt. It’s mostly called the Lori single cylinder deadbolt. Hope you enjoyed the video. Good luck when you run across these. Okay, have a good day. I hope you enjoyed watching this video. Subscribe to my channel, also visit my website and you can see what online Locksmith training I have for beginners, intermediate and advanced, as well as my covert methods of entry, and my non-destructive methods of entry.

How To Install Lori Single Cylinder Deadbolt

How To Install Lori Single Cylinder Deadbolt

Lori Deadbolt

Mr. Locksmith New Westminster: (604) 259-2522

Mr. Locksmith New Westminster Automotive : (604) 259-7617

 

How To Install Lori Single Cylinder Deadbolt

How To Install Lori Single Cylinder Deadbolt

About Terry Whin-Yates North Vancouver

温泰瑞 BA (Hons) Criminology 3rd Generation Locksmith 35 Years Experience BC Security License : B4227

温泰瑞
BA (Hons) Criminology
3rd Generation Locksmith
35 Years Experience
BC Security License : B4227

Terry Whin-Yates is the president and SEO of Mr. Locksmith and it. Terry’s father and grandfather taught him how to pick locks. Terry has 35+ year experience as a locksmith and a BA(Hons) degree in Criminology from Simon Fraser University. Today he lives in Vancouver and his children work in the business. Mr. Locksmith has several locksmith franchisees, all of whom are like extensions of the family business.

 

Triton Key Machine Decodes & Cuts Ford Key (8 Cut) | Mr. Locksmith New Westminster

Triton Key Machine Decodes & Cuts Ford Key (8 Cut): Triton Key Machine Decodes & Cuts Ford Key (8 Cut): Triton states they can cut 99% of all commercially available car and motorcycle keys, including single and double-edge, high security, Tibbe (6 and 8-cut) and tubular.

Triton Key Machine Decodes & Cuts Ford Key (8 Cut) | Mr. Locksmith™ New Westminster

Custom search functions include the ability to search by vehicle model, keyway or IC card number. The Triton by Lock Labs is an all-in-one key cutting machine with the ability to generate & duplicate keys. From automotive to residential, tibbe to tubular and even key engraving. Controlled by a 7” touchscreen, the Triton provides step-by-step guidance throughout each of its features, making it one of the easiest key cutting machines to operate. Though its core operations are very intuitive and feature for more seasoned users or for those who will read the manual. The Triton’s direct duplication feature traces and cuts unknown keyways for those rare instances you have an original key and a compatible blank but no space and depth information.

Mr. Locksmith New Westminster: (604) 259-2522

Mr. Locksmith Automotive New Westminster(604) 259-7617

Ford 8 Cut Keys

The Triton Key Machine enables our Automotive Locksmith to copy Customer Ford Keys. Mr. Locksmith Car Locksmith can copy/decode the customers’ Ford Key and then cut the new Ford Key to Factory Specifications. In this video, Mr. Locksmith Decoded a Ford 8 Cut key and then cut the key by code on the Triton Key Machine. The Key Machine successfully and accurately decoded the Ford key to the Factory code and then cut a key by code. The key worked perfectly in the Ford locks.

Triton Key Machine Decodes & Cuts Ford Key:

 

 

Triton-Decodes-Cuts-Ford-Key-8-Cut-new-westminster

Triton Decodes & Cuts Ford Key (8 Cut) | Mr. Locksmith New Westminster

 

 

Triton Key Machine Decodes & Cuts Ford Key (8 Cut)

At Mr. Locksmith Training we will be testing this key machine and will post lots of videos soon. I will cut and decode and cut by code Automotive Keys, Motorcycle, Tibbe, Tubular, Standard Domestic keys and even test the engraving function. Then we will install it in an Automotive Locksmith Service Truck for the ultimate testing.

Decode a Ford Ranger Key. On the screen go to “automotive,” Scroll down. It’s an eight-cut Ford Ranger, 1996 to 2012, select the codes, Hit decode. Insert the key in the vice and use the tip stop of the middle line to line the tip. It’s an eight-cut.  When it is decoded, we enter it into our lock codes and it came up a valid code. Insert the new key black and cut the key.  And let’s go test it. Put the key in as we just cut it fresh. Works perfectly.

Triton Key Machine Info:

  • Contact: Chris Kenessey
  • America Key Supply (702) 941-7410 Ext: 322
  • email: [email protected]

 

 

Triton-Decodes-Cuts-Ford-Key-8-Cut-new-westminster

Triton Decodes & Cuts Ford Key (8 Cut) | Mr. Locksmith New Westminster

Triton Key Machines Features:

  • A patented 4-way jaw (included) design that is capable of handling an overwhelming majority of all automotive key cutting needs.
  • A fully-integrated, all-in-one design that includes onboard storage for all cutting bits and tracers.
  • 2-year warranty which protects against all machine failures that result from flaws in manufacturing.
  • Unlimited, free updates for the life of your machine. Machine updates occur via Wi-Fi (no need to connect to your PC).
  • Removable chip tray for easy clean-up without having to unmount the machine from your bench or vehicle.
  • Bolt down kit (sold separately) for the safe and secure mounting of your machine to the surface of your choice.
  • A 12-volt power adapter (sold separately) that will allow you to operate the machine with nothing more than the power from your vehicle cigarette lighter.

Triton also contains a comprehensive database of commercial & residential keys and can even generate dimple cut keys.

In conclusion, the Triton Key Machines successfully and accurately Decoded & Cut a Ford Key (8 Cut).

Triton-Decodes-Cuts-Ford-Key-8-Cut-new-westminster

Triton Decodes & Cuts Ford Key (8 Cut) | Mr. Locksmith New Westminster

 

Triton Key Machine Series:

Triton Key Machine Unboxing

Triton Key Machine Decodes & Cuts Ford Key (8 Cut)

Honda High Security Key Decode & Cut | Triton Key Machine

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

Mr. Locksmith New Westminster: 604-259-2522

Mr. Locksmith Automotive New Westminster(604) 259-7617

 

 

 

Contact New Westminster Locksmith. Do you require urgent assistance? Do you have any questions or concerns? No Problem, One of our trained professionals will be happy to serve you via phone, email or by filling out the contact form below.

 

Mr. Locksmith New Westminster: (604) 259-2522

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

Triton-Decodes-Cuts-Ford-Key-8-Cut-new-westminster

Triton Decodes & Cuts Ford Key (8 Cut) | Mr. Locksmith New Westminster

 

triton key machine manual, triton key machine youtube, triton key machine engraving, triton key machine calibration, xtool triton, best automotive key cutting machine, triton keyboard, Triton Key Machine Automotive keys, Triton Key Machine car keys, Tibbe Keys, Tubular Keys, Acc Keys, Duplicates Car Keys, Duplicates Automotive Keys, Motorcycle Keys, Copy Car Keys, Decodes Car Keys, Key Cuts, Keys Duplicated, triton key cutting machine review, triton key machines, american key supply, 

Mr. Locksmith Richmond For Sale

Mr. Locksmith Richmond For Sale | Call (604) 239-2103

Locksmith Richmond For Sale: Hi, I’m Terry from Mr. LockSmith. I am looking for a Licensee for Mr. LockSmith Richmond, British Columbia. Locksmithing has been absolutely fantastic for me. I raised my family, I’ve had a nice life, I’ve had nice vacations, and it’s all because of locksmithing. Whether we got a good economy, bad economy, we still make money as locksmiths. And unfortunately, even during COVID, we had so many break-ins at night in the city, or everywhere, it was just break-ins like crazy, and mostly commercial break-ins. We still survived COVID, and we still doing well before, during, and after. It hit us a little bit, there’s no denying that, but we recovered pretty quick.

Being a locksmith is great. My grandfather was a locksmith, my father, my uncle. I had some of the best training in the world through family, and I’ve done lots of courses. Even now, I still take courses. A lot of manufacturers have good courses. So what I’ve done is I’ve looked at how we make money, and what’s the best products to sell, what’s the best services to offer. More importantly, the training program teaches you how to become a businessperson.

Mr. Locksmith™ Richmond

Become a Locksmith

How to become a locksmith and make money. For-profit is not a bad word. We want to be successful, we wanna drive nice service vehicles, we wanna have nice tools, we wanna have a nice life, and nice vacations, and raise our family, so we have to become profitable. We don’t treat this as a hobby, it’s a skilled trade. We keep care of the training, but more importantly, the training teaches you how to become a businessman, or a businessperson, because we will have to make money. It is really important that you not only become a good locksmith, but you also become a good businessperson. The training keeps care of that.

Locksmith Marketing

Our marketing, your website, your online presence, we keep care of all of that. I have highly qualified staff that have one purpose is to keep the social media up there, our YouTube channel is doing fantastic, and you know what, that YouTube channel is extremely good to help you make money with your clients. So our YouTube channel is strong, we have a lot of videos, a lot of views, well over a hundred years of watched video on our YouTube channel. And more importantly, those YouTube videos are advertising for your company, for Mr. LockSmith, and also they’re on your website. I love locksmithing, it’s been good for my life. I have very successful Mr. LockSmiths, they’re very happy, and we’ve done extremely well. It’s a brand new territory for us, we’re looking for a new owner.

Bump-Keys-Castration-Rings

Mr. Locksmith Bump Keys

Our marketing, your website, your online presence, we keep care of all of that. I have highly qualified staff that have one purpose is to keep the social media up there, our YouTube channel is doing fantastic, and you know what, that YouTube channel is extremely good to help you make money with your clients. So our YouTube channel is strong, we have a lot of videos, a lot of views, well over a hundred years of watched video on our YouTube channel. And more importantly, those YouTube videos are advertising for your company, for Mr. LockSmith, and also they’re on your website. I love locksmithing, it’s been good for my life.

I have very successful Mr. LockSmiths, they’re very happy, and we’ve done extremely well. It’s a brand new territory for us, we’re looking for a franchisee. Give me a call, give me an email, and we can talk about how you can become a locksmith and join our team at Mr. Locksmith Richmond BC.

Give me a call, give me an email, and we can talk about how you can become a locksmith and join our team at Mr. LockSmith Richmond.

Call Terry at Mr. Locksmith Richmond Call (604) 239-2103 or email [email protected]

Terry Whin-Yates is a 3rd Generation Locksmith with 35+ years of Locksmith experience and has a BA (Hons) from Simon Fraser University.

 

Mr.-Locksmith-Richmond-For-Sale-Call-604-239-2103

Mr. Locksmith Richmond For Sale | Call (604) 239-2103

Merry Christmas! Happy New Year! | Mr. Locksmith™ New Westminster

Merry Christmas! Happy New Year! | Mr. Locksmith™ New Westminster

Merry Christmas and a Happy New Year to my family, friends, and customers.

Lots of Great Videos coming this Year.

Mr. Locksmith New Westminster: (604) 259-2522

Subscribe to my channel.

Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced, as well as my covert methods of entry and my non-destructive methods of entry.

Merry-Christmas-Mr-Locksmith-New-Westminster

Merry Christmas Mr Locksmith New Westminster Elf on the Shelf

 

Merry-Christmas-Mr-Locksmith-New-Westminster

Merry Christmas Mr Locksmith New Westminster Elf on the Shelf

 

Mr. Locksmith™

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

Mr. Locksmith New Westminster: (604) 259-2522

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

Merry-Christmas-Mr-Locksmith-New-Westminster

Merry Christmas Mr Locksmith New Westminster

How to Take a Copy of a Key | Mr Locksmith New Westminster

How To Take A Copy Of A Key | Mr Locksmith New Westminster

https://www.mrlocksmithnewwestminster.com/

Sending a locksmith the picture of a key can help us identify the key or lock. This may seem like a silly video, but it’s actually very important. I made the “How to Take a Picture of a Key” to help our customers.

  1. Take an in-focus picture of the key.
  2. Take a picture of both sides of the key.
  3. Remove any tape or obstruction covering the head of the key.
  4. If possible a picture of the end of the key.
  5. In-focus pictures of the key.

Key Copy Near Me

A lot of times customers ask Where can I get a “key copy near me’”  “I need my locks rekeyed.” or “Duplicate Key” and then they try to describe it to me. Sometimes they can, sometimes they can’t, sometimes there’s no information that you can see, but I can see. So, a lot of times we ask our customers “Take a picture, take an in-focus picture of the key.” So we ask our customers, email or just text me, a picture of your key. So this is how to take a picture of your key so I can see what you have. You gotta take both sides of the key. So take a picture there, so I can see what the make is, I can look at some of the grooves and then turn the key over and take a picture again, and then I can see from the other side I know it’s a Schlage, and on this I can see it’s a C123. So I can tell you “Yes I have that key.” So whatever key you have, whether it’s a car key, or house key, motorcycle, whatever, in focus, both sides of the key, then you can email it to me or a locksmith and we can tell you if we have that key.

Email: [email protected]

How-to-take-a-picture-of-a-key-C123

How to take a picture of a key C123

How-to-take-a-picture-of-a-Schlage

How to take a picture of a Schlage Key

How-to-a-picture-of-a-Kwikset

How to take a picture of a Kwikset Key

How-to-take-a-picture-of-a-key-Weiser

How to take a picture of a Weiser Key

 

Sometimes we’ve had people on fishing expeditions up north, they’ve taken their keys with them they’re in the middle up north, in the middle of nowhere, the wife is locked out, they have the key, and this one, we can actually see this one has a code, so we now know we can cut that by code and we can get that person in the house really quick and easy.

In conclusion, silly as it sounds “how to take a picture of a key”, in focus, both sides of the key, text or email, then we can tell you what you have. [email protected]

How-to-take-a-picture-of-a-key-Mr-Locksmith

How to take a picture of a key Mr. Locksmith

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

Locksmith Near Me Port Moody | Mr. Locksmith™ (604) 239-0983


Locksmith Near Me Port Moody | Mr. Locksmith™ (604) 239-0983

https://www.mrlocksmithcoquitlam.com/

Locksmith Port Moody BC: (604) 239-0983

Automotive Locksmith Port Moody : (604) 259-7617

Locksmith Near Me Port Moody BC. If you’re locked out and need keys and need a locksmith in Port Moody, call Mr. Locksmith. Mr. Locksmith Port Moody, if you need 24-hour lockout services. House lockout, car lockout, call Mr. Locksmith Port Moody. Re-key locks, lock repair, rekeying locks, lock change, Mr. Locksmith Port Moody who is there it help.

Open Sentry Safe: If you are locked out of your Sentry Safe, call Mr. Locksmith Port Moody. We can open that safe easily and quickly. So for a locksmith near me Port Moody BC., call Mr. Locksmith Port Port Moody BC.

Do you need a master key system, we can design it from scratch or we can add on to your existing master use system. Mr. Locksmith Port Moody does commercial and residential services, house lockout, locked out any keys, no problem. Key extraction, if you’ve broken the key to your house or your business, we can remove the broken key and make you brand new keys.

Automotive Locksmith Port Moody: If you need an automotive locksmith, keys locked in your car, we are your car locksmith Winnipeg. Keys locked inside the vehicle, or you’ve lost your keys, we can make the car key made on-site. We have a mobile automotive locksmith Port Moody Call (604) 259-7617

Mailbox Keys: You lost your keys to your mailbox, we can open your mailbox, repair it, replace it, give you brand new keys. Mr. Locksmith Port Moody is your complete locksmithing service. We have 24-hour locksmith Port Moody service. Mobile locksmith Port Moody and emergency locksmith for the Port Moody.

Mr. Locksmith is your locksmith near me Port Moody, B.C. Mr. Locksmith services Port Moody, all major locks and door locks for residential and commercial locks. Abloy, Primus, Schlage, Weiser, Kwikset, Ingersoll Rand, Multi-lock, Assa, Medico, Abloy. If you’re locked out of your safe and you can’t get in, we specialize in opening safes that you can’t get open. Port Moody Locksmith

Mr. Locksmith™ Port Moody British Columbia

Locksmith Near Me Port Moody  BC – Mr. Locksmith™ Port Moody (604) 239-0983

 

Locksmith Near Me Port Moody | Mr. Locksmith

About Terry Whin-Yates

Thanks for watching! 🙂

Locksmith Near Me Port Moody | Mr. Locksmith™ (604) 239-0983

(604) 239-0983

Locksmith Near Me Port Moody | Mr. Locksmith

Locksmith Near Me, Locksmith Near Me Port Moody, Locksmith Near Me Port Moody BC, Locksmith Near Me Port Moody British Columbia, Locksmith Port Moody, Locksmith Near Me Port Moody British Columbia, Locksmith Port Moody BC, Port Moody Locksmith, Locksmith Port Moody British Columbia, Mr. Locksmith Port Moody, Mr. Locksmith Port Moody BC, Mr. Locksmith Port Moody British Columbia

 

Rental Car Keys Separate | Mr. Locksmith™ New Westminster

Rental Car Keys Separate | Mr Locksmith™ New Westminster

How to Make Keys to Cars, Automotive ONLINE COURSE

I rented this Volvo and it’s got the keys on a ring and somebody said just keep on twisting it, so I can get them apart, rather than try and cut it or find some pliers. So, I just twist and twist and twist like a figure eight and I got them apart. It is a lot better and I hate it when you rent a car, you have two keys stuck together. If I lose it, I lose ’em both. So, this way, simple. Just keep on twisting it, like a figure eight, ’til they pull apart. You don’t have to run around, trying to find a pair of pliers or anything. You just twist, pull apart. I had a friend, lost two keys, lost his whole set, lost two keys, it cost him $450, cost him over $600 to replace the keys and get them reprogrammed. So, this is a Volvo. This probably costs way more than that. Worst case, I gotta replace one, I don’t have to replace two. I hate that. You rent a car, it comes with that stupid tag, but just twist it, pull it and away we go. We could use a pair of pliers, but this is definitely easier and quicker.

Certificate in Automotive Locksmithing

 

Rental Car Key Separate | Mr. Locksmith

rental car keys tied together | Mr. Locksmith

 

 

 

 

 

 

Mr. Locksmith™
————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

COMING SOON: ONLINE COURSE “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

————————-
Business email: [email protected]
Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230
————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/
——————
Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

http://mrlocksmithtraining.com/about-terry-whin-yates/
—————–
Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.
————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

 

 

KEYWORDS: Mr. Locksmith™, Terry Whin-Yates, Mr. Locksmith, locksmith,
locksmith training , locksmith school, rental car keys tied together,
rental car keys, rental car keys attached, rental car keys separate, rental car keys,

I Bought the Wrong Inverter | Mr. Locksmith™ New Westminster Video

I Bought the Wrong Inverter | Mr. Locksmith™ New Westminster Video

Automotive Locksmith Traning Course Sign up Now!

“How to Become an Automotive Locksmith” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

I bought the wrong inverter. I wanted to be able to put it in my service truck or my camper or whatever, but this is for my service truck. So I wanted to be able to take 12 volts from the battery and be able to plug in 110 key machines. Now, in theory, this is a great deal. This was on sale for like $100, it is a 12 volt to 110 volt Modified sine wave 2,000-watt inverter, it’s more than I need, it’s going be perfect for my key machines. So I thought. I’m not an expert on inverters but the first thing I learned is there are actually two types: Modified Sine Wave and Pure Sine Wave

That will be great for the key machines. However, this is a modified sine and what I need is the pure or the regular Sine Wave. So the problem you’ll run across between the regular wave which is considered clean, and this modified one which is squared off is the modified wave is not good for if you are running computers. So it’s not as clean. That’s why they’re really inexpensive. It is going to cost me two, three, four times more money for getting the proper one I want. And the reason I am not going to use this one, it will do the trick for the basic duplicator key machines, however my Miracle A9S and also my ITL are code machines and they run circuit boards, they are like mini little computers on there. I am going to have to take it back now, it’s really really good but it’s a Modified Wave and I can’t use this on my computer key machines. I’m risking problems. I could be wrong, I am not going to take a chance, I will go out there and get the proper one for my locksmith service truck.

 


Automotive Locksmith Traning Course Sign up Now!

“How to Become an Automotive Locksmith” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

I hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Mr. Locksmith™

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

Automotive Locksmith  “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

 

———————————————————————————————————–
Business email: [email protected]

Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230

————————————————————————————————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/

————————————————————————————————-

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

About Terry Whin-Yates

————————————————————————————————-

Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.

————————————————————————————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Call Mr. Locksmith New Westminster (604) 259-2522

I Bought the Wrong Inverter

 

 

IFAK Individual First Aid Kit For Locksmiths | Mr. Locksmith New Westminster

IFAK Individual First Aid Kit For Locksmiths | Mr. Locksmith New Westminster

For further info and to sign up for my new On-LIne “How to Pick Locks” Course go to http://mrlocksmithtraining.com/

Recon Medical Tourniquet – (Black) GEN 3 Mil-Spec Kevlar Metal Windlass Aluminum First Aid Tactical Swat Medic Pre-Hospital Life Saving Hemorrhage Control Registration Card, AOS: https://amzn.to/2n0q0R6

Everlit Emergency Survival Trauma Kit with Tourniquet 36″ Splint, Military Combat Tactical IFAK for First Aid Response, Critical Wounds, Gun Shots, Blow Out, Severe Bleeding Control: https://amzn.to/2kXpcMf

IFAK Trauma Kit: Individual First Aid Kit.


First aid kit for locksmiths. We are in our service vehicles all day long. It’s smart to have a first aid kit in your service truck. Also, you should have one in the house and you should have one in your personal car.

Everybody has their personal choices for a First Aid Kit and this is mine. I have a Smith and Weston folding knife with a glass breaker and seat belt cutter. I like having a black marker so you can write the person’s name on their forehead or time a tourniquet was applied, etc.

Some people like a couple of tourniquets in their kit. Also, I have my boo-boo kit, band-aids, butterfly straps, butterfly bandaids, alcohol wipes, iodine wipes, antibiotics, Tylenol, Advil, some stomach medicine, pair of gloves, scissors, tweezers, forceps, space blanket, Israeli bandages, quick clots, gauze, triangular bandage and more.

We are lucky in North America and most Western societies, we have the Good Samaritan Act, as long as you’re trying to help, in most cases you are not going to get sued, we are not doctors, we’re just trying to help.

Take a First Aid Course, methods, procedures and products are getting better every day to help people.

Please Subscribe to my Channel.

For further info and to sign up for my new On-LIne “How to Pick Locks” Course go to http://mrlocksmithtraining.com/

For further info and to sign up for my new On-LIne “How to Pick Locks” Course go to http://mrlocksmithtraining.com/

Mr. Locksmith™

About Terry Whin-Yates

I hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

I hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Mr. Locksmith™

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

Automotive Locksmith  “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

 

———————————————————————————————————–
Business email: [email protected]

Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230

————————————————————————————————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/

————————————————————————————————-

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

About Terry Whin-Yates

————————————————————————————————-

Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.

————————————————————————————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Call Mr. Locksmith New Westminster (604) 259-2522

IFAK Individual First Aid Kit

Robson St Vancouver BC Boarded up to Prevent Looting | Mr. Locksmith™

Robson St Vancouver BC Boarded up to Prevent Looting | Mr Locksmith (604)-262-1907

https://mrlocksmithvancouver.com/

The Pandemic has closed down most Retail Stores and Businesses in Vancouver and the World.

The larger Chains quickly boarded their storefronts with Plywood.

Other businesses are starting board up windows to guard against crime after closing as a result of the COVID-19 pandemic.

The Vancouver Police Department says commercial break-ins have increased and patrols have been beefed up in hardest-hit areas.

In a March 26 press release, the VPD said some criminals are trying to take advantage of the situation and it’s “taking significant measures to combat property crime while local and provincial measures are in place to address the spread of COVID-19.”

To increase security, the VPD advises Vancouver businesses to:

Move merchandise away from windows and out of view or remove it from the retail space altogether

Use window shutters to minimize damage and reduce visibility

Upgrade locks

Increase outdoor lighting levels to ensure the space around your business is visible and well-lit

Aside from the VPD increasing patrols in some areas, property crime detectives are also running several investigative projects to target known offenders.

Break-ins quadruple in Vancouver as stores shut for COVID-19 and the crime stats are increasing.

Mr. Locksmith (604)-262-1907

Mr. Locksmith™

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

COMING SOON: ONLINE COURSE “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

————————-
Business email: [email protected]
Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230
————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/
——————
Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

http://mrlocksmithtraining.com/about-terry-whin-yates/
—————–
Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.
————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Robson St Vancouver BC Boarded up to Prevent Looting | Mr. Locksmith